How To Unroot / Unbrick Moto X Play 2015 (Restore Moto X Play Stock Lollipop Firmware)

If you have a Moto X Play and you want to restore it back to stock ROM, then follow the guide to Unroot Moto X Play 2015 and Back to Stock

Important : 

You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

E-TechnoTips will not be held responsible for any kind of damage occurred to your Moto X Play 2015 while following this tutorial.Do it at your own risk.

Remember:

ENABLE USB DEBUGGING MODE

Now you need to enable USB debugging mode. Without enabling USB debugging mode on your device you can’t start the root, Custom ROM or Unlock process.(Setting->About Phone->Build Number->Tap 7 times on  build number->It will enable the developer mode in the main setting->Go to Developer->Enable the Debugging)

Downloads

Download | Stock Firmware for Moto X Play  XT1562, XT1563 and more

Mirror | Stock Firmware for Moto X Play XT1563 (Faster download)

Check Model Number of your Moto X play and download the right firmware (Important)

Pre-Requirements:

• Set up ADB and Fastboot on your computer.
• Install Motorola USB Drivers on your Computer.

How To Unroot / Unbrick Moto X Play 2015 (Restore Moto X Play Stock Lollipop Firmware)

• First of all, Download the firmware file from the download section and transfer it to your PC.
• Make sure you have Setup ADB and Fastboot on your PC. Also accept Always allow from this computer when you plug in the device for the first time to enable USB Debugging.
• The firmware file is a zip file. Extract the firmware file in the same folder where you have setup ADB and fastboot so as to get the boot, system, logo and other image files.
• Now power off your device and unplug it from your PC.
• Boot into the bootloader. To do so, press and hold volume down and the power button for 5-6 seconds.
• You will see the bootloader screen. Now connect your device to the PC using a USB cable.
• Navigate to the location where you have placed the firmware file. While the folder with recovery.img file is open, right-click on an empty space and select “Opencommand window here” option to launch a cmd window.

Now type the following in the command prompt to get a code to check your device connectivity

"fastboot devices"

Now issue the following commands to install the stock firmware.

"fastboot flash partition gpt.bin

fastboot flash bootloader bootloader.img

fastboot flash logo logo.bin

fastboot flash boot boot.img

fastboot flash recovery recovery.img

fastboot flash system system.img_sparsechunk.0

fastboot flash system system.img_sparsechunk.1

fastboot flash system system.img_sparsechunk.2

fastboot flash system system.img_sparsechunk.3

fastboot flash system system.img_sparsechunk.4

fastboot flash system system.img_sparsechunk.5

fastboot flash system system.img_sparsechunk.6

fastboot flash system system.img_sparsechunk.7

fastboot flash modem NON-HLOS.bin

fastboot erase modemst1

fastboot erase modemst2

fastboot flash fsg fsg.mbn

fastboot erase cache

fastboot erase userdata

fastboot reboot"

Once the installation is complete, the phone will self-reboot.

If you see the new boot logo, that means you have successfully installed stock firmware onto your device.And Device is now fully working.Bootloop/Bricked Phone is now fixed.